Check the non return valve The non return valve is located on the inlet of the pump. Switch off the power to the pump. Remove the black plastic strainer and connectors. If you put your finger into the inlet you should feel a pin that should freely move backwards and forwards when pressed. Place the ...
The pump has a dry run protection mode that is designed to protect your pump in the event of no water in the tank. This means the pump has 'gone to sleep' and will automatically start again at set timings. Please check to ensure that there is water in the tank. Power off the pump ...
Check the circuit breaker Has the circuit breaker tripped? If so turn it back on again and see if it trips again. If there is a plug on the cable please replace the 13 amp fuse. Has this resolved the problem? YESNO
If your pump has no power please do the following : Check the power supply. Firstly let's check to make sure there is not a problem with the power source. If the pump power cable has a plug on the end of it please plug it into an extension lead from a different plug socket. ...
Call the Technical Team Unfortunately it sounds as though you will need to give us a call on 01733 405111 Option 2. If possible please have the following information to hand : Date of Purchase Serial number ( on the side of the pump ) Postcode Alternatively you can send us an email. Contact Technical ...
Check the non return valve The non return valve is located on the inlet of the pump. Switch off the power to the pump. Remove the black plastic strainer and connectors. If you put your finger into the inlet you should feel a pin that should freely move backwards and forwards when pressed. Place the ...
If your pump has no power please do the following : Check the power supply. Firstly let's check to make sure there is not a problem with the power source. If the pump power cable has a plug on the end of it please plug it into an extension lead from a different plug socket. ...
Please note that the pump has a pressure switch built into the pump so if it has sensed that there is a leak or a valve / tap is open then the pump will automatically run. Please check the following : Connections Check that the connection from the pump ( where the black / green ...
Contact electricain. It sounds as though there may be a problem with your power socket. Please contact an electrician.
Please note that the pump has a pressure switch built into the pump so if it has sensed that there is a leak or a valve / tap is open then the pump will automatically run. Please check the following : Check in tank connections Check that the connection from the pump ( where the ...
