Category Archives: Rain Director

Rain Director

Red spanner light is on – final check

Check the system. As a final test please press the "Refresh" button on the control panel. This will empty the header tank and then automatically refill the header tank. Is the red spanner light still off? YesNo
Rain Director

Red spanner light is on – fill tank

Fill the header tank. Open the left hand door on the Rain Director Control unit. You will see several pipes and one of the pipes splits into two pipes, this is the mains water feed. On the left hand pipe ( of the two ) you will see a quarter turn valve with arrows on ...
Rain Director

Red spanner light is on – Contact

Call the Technical Team Unfortunately it sounds as though you will need to give us a call on 01733 405111 Option 2. If possible please have the following information to hand : Date of Purchase Postcode Alternatively you can send us an email. Contact Technical Services
Rain Director

Red spanner light is on – Float Switch

Check Float Switches. Inside the Header Tank there are two float switches. Please check that both switches move freely and there is no debris or swarf stopping them from lifting up and down. Go back to the control panel and press the 'Rain Drop' button. Did this fix the problem? YESNO
Rain Director

Constantly in Refresh Mode – Reboot

Restart Control Unit. The mains water solenoid valve may be stuck open. Please switch off the control unit, wait 10 seconds and then power up the unit again. This will reset the solenoid valves. Did this fix the problem? YESNO
Rain Director

Constantly in Refresh Mode – Bypass- V2

Check mains water bypass. Open the left hand door on the Rain Director Control unit. You will see several pipes and one of the pipes splits into two pipes, this is the mains water feed. On the left hand pipe ( of the two ) you will see a quarter turn valve with arrows on ...
Rain Director

Constantly in Refresh Mode – Contact

Call the Technical Team Unfortunately it sounds as though you have a problem with the mains water solenoid and you will need to give us a call on 01733 405111 Option 2. If possible please have the following information to hand : Date of Purchase Postcode Alternatively you can send us an email. Contact Technical ...
Rain Director

Constantly in Refresh Mode – Bypass- V1

Check mains water bypass. Open the left hand door on the Rain Director Control unit. You will see several pipes and one of the pipes splits into two pipes, this is the mains water feed. On the left hand pipe ( of the two ) you will see a quarter turn valve with arrows on ...
Rain Director

Header Tank is Overflowing – Float Switch

Check Float Switch. Inside the Header Tank there are two float switches. Please check that the top float switch moves freely and there is no debris or swarf stopping it from lifting up and down. Did this fix the problem? YESNO